1060 nm Single-Mode VCSEL and Single-Mode Fiber Links for Long-Reach Optical Interconnects
نویسندگان
چکیده
منابع مشابه
New Design of Optical Filters Based on Single Mode-Multimode-Single Mode Fiber Structure for Optical Fiber Communication Systems
In this paper, a design of optical filters based on single mode-multimode-single mode fiber structure (SMS) is demonstrated. The multimode interference effect can be utilized to design wavelength-selective devices with high extinction ratio. The proposed optical filters are realized by using standard optical fibers. Two optical filters are designed to operate with wave division multiplexing (WD...
متن کاملSingle Mode Air-Clad Single Crystal Sapphire Optical Fiber
The observation of single mode propagation in an air-clad single crystal sapphire optical fiber at wavelengths at and above 783 nm is presented for the first time. A high-temperature wet acid etching method was used to reduce the diameter of a 10 cm length of commercially-sourced sapphire fiber from 125 micrometers to 6.5 micrometers, and far-field imaging provided modal information at interval...
متن کاملHigh reliability level on single-mode 980nm-1060 nm diode lasers for telecommunication and industrial applications
We demonstrate very high reliability level on 980-1060nm high-power single-mode lasers through multi-cell tests. First, we show how our chip design and technology enables high reliability levels. Then, we aged 758 devices during 9500 hours among 6 cells with high current (0.8A-1.2A) and high submount temperature (65°C-105°C) for the reliability demonstration. Sudden catastrophic failure is the ...
متن کاملFiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure.
A refractive index (RI) sensor based on a novel fiber structure that consists of a single-mode-multimode-single-mode (SMS) fiber structure followed by a fiber Bragg grating was demonstrated. The multimode fiber in the SMS structure excites cladding modes within output single-mode fiber (SMF) and recouple the reflected cladding Bragg wavelength to the input SMF core. By measuring the relative Br...
متن کاملAll-single-mode fiber resonator.
An all-fiber-ring resonator has been constructed using a single strand of single-mode optical fiber and a directional coupler. Derivation of the resonator finesse in terms of fiber and directional coupler parameters is given. A finesse of 80 has been achieved experimentally. Applications of such a fiber-ring resonator are discussed.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Lightwave Technology
سال: 2019
ISSN: 0733-8724,1558-2213
DOI: 10.1109/jlt.2019.2908249