1300 K Compressive Properties of a Reaction Milled NiAl-AlN Composite
نویسندگان
چکیده
منابع مشابه
Reactive Infiltration Processing and Secondary Compressive Creep of NiAl and NiAl-W Composites
Reactive infiltration processing was used to fabricate bulk NiAl and fiber-reinforced NiAl composites. Homogenous, pore-free materials were obtained by chemical reaction between nickel and aluminum after complete infiltration with liquid aluminum of preforms of nickel wires (containing tungsten wires for the composites) with low surface-to-volume ratio, high permeability, and regular infiltrati...
متن کاملThermal Shock Properties of ZrB2-SiCp-Graphite and ZrB2-SiCp-AlN Ceramic Matrix Composite Material
Thermal shock property of the material can be improved by improving fracture property of the material. In this paper, factors affecting fracture property have been studied and the effect of residual stress, microstructure, strain rate and stress concentration on fracture property of material has been analyzed, which may provide help for improving thermal shock property of material. Thermal shoc...
متن کاملEffect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying
Nanostructured Al composites with 2.5 wt.% aluminum nitride (AlN) were fabricated by powder metallurgy using mechanically milled aluminum powder mixed in a planetary ball mill with different particle sizes of AlN (50 nm and 1 μm) as reinforcement. After 20 h milling, the powders were die-pressed uniaxially in a steel die and then sintered at 670 °C for 2 h. The morphologies and properties of th...
متن کاملinto fX(1300)K and J/ψK ∗ X(1430)
In light of the recent experimental results on decays B+ → fX(1300)K and B±(0) → J/ψK X (1430) from Belle, we study the B → P (V )S type decays, B±(0) → f0(1370)K and B±(0) → J/ψK 0 (1430), in comparison with the B → P (V )T type decays, B±(0) → f2(1270)K and B±(0) → J/ψK 2 (1430). We calculate the BRs for these decays by using the form factors obtained in the ISGW2 model [the improved version ...
متن کاملCompressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination
The buckling and postbuckling behaviors of a composite beam with single delamination are investigated. A three-dimensional finite element model using the commercial code ANSYS is employed for this purpose. The finite elements analyses have been performed using a linear buckling model based on the solution of the eigenvalues problem, and a non-linear one based on an incremental-iterative method....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 1990
ISSN: 0272-9172,1946-4274
DOI: 10.1557/proc-194-211