13.03: Bending-shear interaction of steel I-shaped cross-sections: Statistical investigation
نویسندگان
چکیده
منابع مشابه
Experimental Investigation on Cyclic Behavior of Butterfly-shaped Links Steel Plate Shear Walls
An innovative type called "butterfly-shaped links steel plate shear wall (BLSPSW)" was proposed as a lateral load resisting system. In this novel system, by creating butterfly-shaped links in the four sides of the web plate, the lateral load resisting mechanism is not the development of a diagonal tension field on the web plate (similar to Conventional SPSWs), but the capacity of the system is ...
متن کاملStrength of arch-shaped members in bending and shear
Arch-shaped members are widely used for construction of tunnels, bridges, silos and shells. These members are not typically provided with transverse reinforcement and may thus have a brittle behaviour at failure. When subjected to bending or shear, traditional design methods used for straight members are not applicable due to deviation forces developing at the curved chords carrying compression...
متن کاملStatistical Analysis of the V-tool Bending Process Parameters in the Bending of Hc260y Steel
J. Cumin, I. Samardžić, L. Maglić. Mechanical Engineering Faculty, J.J. Strossmayer University of Osijek, Slavonski brod, Croatia. This paper presents statistical analysis of the parameters in the V-tool bending process of the HC260Y steel. Assessment of the mathematical model and analysis of variance (ANOVA) were performed within the design of experiments. The hydraulic testing machine Amsler ...
متن کاملBending Fatigue Tests and Finite Element Models of Steel Rectangular Hollow Sections [SRHS]
The Welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). A lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. In order to establish the fatigu...
متن کاملinvestigation of frame and shear wall interaction
the combination of flexural frame and shear wall is one of the suitable systems to apply in reinforced concrete buildings. the deflections of flexural frame become limited due to the high stiffness of wall and the interaction of these systems. tall buildings even higher than fifty stories can be designed by using frame- wall systems. with respect to special behavior of flexural frame or shear w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ce/papers
سال: 2017
ISSN: 2509-7075
DOI: 10.1002/cepa.426