2-Sulfoethylammonium Trifluoromethanesulfonate as an Ionic Liquid for High Temperature PEM Fuel Cells

Fuel Processors for PEM Fuel Cells

Objectives • Demonstrate high performance desulfurizer, catalyst, micro-reactor and microcombustor/ microvaporizer concepts that will enable production of compact fuel processors for proton exchange membrane (PEM) fuel cells • Design, fabricate and evaluate a 1-kWe fuel-flexible fuel processor during the first 36 months (one of the fuels capable of being reformed will be EPA Phase II reformulat...

Thermal curing of PBI membranes for high temperature PEM fuel cells

Synthesis of Novel Proton Conducting Mesoporous Silica (ms) Films for High Temperature Pem Fuel Cells

Transparent free-standing mesoporous silica (MS) films were synthesized from a system of TMOS-Brij-Acid-H2O. The non-ionic surfactants used included Brij 22 (C12EO10OH), Brij 56 (C16EO10OH), and Brij 76 (C18EO10OH). The acids used include HCl, H3PO4, and CF3SO3H. The effect of synthesis parameters on the synthesis and the proton conductivity of mesoporous silica were investigated. The Brij 56/C...

Temperature control of open-cathode PEM fuel cells

Proper temperature control of Proton Exchange Membrane Fuel Cells is a crucial factor for optimizing fuel cell performance. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear ...

High-temperature Fuel Cells

The molten carbonate fuel cell operates at approximately 650 °C (1200 °F). The high operating temperature is needed to achieve sufficient conductivity of the carbonate electrolyte, yet allow the use of low-cost metal cell components. A benefit associated with this high temperature is that noble metal catalysts are not required for the cell electrochemical oxidation and reduction processes. Molt...