2043) Yield Condition of Shells Under Asymmetric Loading (I)(Structure)
نویسندگان
چکیده
منابع مشابه
Study on buckling of steel cylindrical shells with an elliptical cutout under combined loading
In this paper, simulation and analysis of thin steel cylindrical shells with elliptical cutouts under oblique loading were studied using finite element method. First, the numerical results were validated by the results of experimental test performed by an INSTRON 8802 servo hydraulic machine. Also, the effect of cutout angle (θ), cutout size, cutout position (L0/L) and cutout aspect ratios (b/a...
متن کاملStrip yield modelling of fatigue crack under variable amplitude loading
The results from ‘strip yield’ approach of the FASTRAN type models of plasticity induced crack closure effects of fatigue cracks subjected to variable amplitude loadings are presented. The strip yield results are compared with authors’ finite element (FE) and experimental results. It has been observed that the strip yield model is seen to be fundamentally limited by choice of α (constraint fact...
متن کاملEffect of Boundary Condition on Pre-Existing Crack Under Fatigue Loading
In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...
متن کاملOptimization of Cylindrical Shells Under Combined Loading Against Brittle Creep Rupture
Optimal structural design of cylindrical shells under overall bending, torsion, tension and internal pressure in creep conditions is considered. The material is assumed to be governed by the Norton-Odqvist nonlinear steady creep law. Minimal weight of the shell is the design objective, radius and wall thickness are design variables, and the constraint refers to brittle creep rupture as describe...
متن کاملFracture response of externally flawed aluminum cylindrical shells under internal gaseous detonation loading
Abstract. Experiments were performed to observe the fracture behavior of thinwall and initially-flawed aluminum tubes to internal gaseous detonation loading. The load can be characterized as a propagating pressure jump with speed of 2.4 km/s and magnitude ranging from 2 to 6 MPa, followed by an expansion wave. Flaws were machined as external axial surface notches. Cracks ran both in the upstrea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1960
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.66.1.0_385