2169 Tensil Strength of Reinforcing Bar with Anchor Plate Used for Bending Reinforcement(Structures)
نویسندگان
چکیده
منابع مشابه
Base plate in bending and anchor bolts in tension
This paper describes the behaviour of the base plate in bending and the anchor bolts in tension, which are the major components of a base plate connection. An analytical model has been derived to predict the component characteristics – the resistance and the stiffness. A description is given of how the behaviour is influenced by contact between the base plate and the concrete surface. The prese...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملA Study on the Bond Strength between High Performance Concrete and Reinforcing Bar
As a preliminary study for the erection of floating structures using high performance concrete, this paper examines the bond characteristics between concrete and the reinforcing bar. Since the floating structure is constructed in aquatic environment, corrosion of the reinforcing steel is likely to develop more prematurely than in onshore structure in case of concrete cracking. A solution to thi...
متن کاملDefining Yield Strength for Nonprestressed Reinforcing Steel
Analytical strengths of reinforced concrete beams and columns based on reinforcing steel stress-strain curves with and without a sharp yield plateau and the nonlinear stress-strain behavior of concrete are compared with strengths calculated in accordance with the ACI Building Code to determine the feasibility of using the 0.2% offset method to define the yield strength of reinforcing steel. Com...
متن کاملAnalyzing Plane-plate Bending with EFGM
The moving least-square technique is used to construct shape function in the Element Free Galerkin Method at present, but sometimes the algebra equations system obtained from the moving least-square approximation is ill-conditioned and the shape function needs large quantity of inverse operation. In this paper, the weighted orthogonal functions are used as basis ones, the application in the cal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan Summaries of Technical Papers
سال: 1967
ISSN: 2433-0035
DOI: 10.3130/aijsaxxe.42.0_313