25Gb/s 1V-driving CMOS ring modulator with integrated thermal tuning
نویسندگان
چکیده
منابع مشابه
A 1v Second Order Sigma-delta Modulator
A second order switched capacitor sigma-delta modulator operating at a supply voltage of 1 V is presented. This low supply voltage restricts the gate overdrive voltage available for switching transistors. The design relies on the elimination of critical switches by using a modified switched op amp for the integrator and novel switched half-supply and reference voltage generators. The design has...
متن کاملIntegrated with CMOS Driver
The emerging field of silicon photonics [1-3] targets monolithic integration of optical components in the CMOS process, potentially enabling high bandwidth, high density interconnects with dramatically reduced cost and power dissipation. A broadband photonic switch is a key component of reconfigurable networks which retain data in the optical domain, thus bypassing the latency, bandwidth and po...
متن کاملA Cmos Current Controlled Ring Oscillator with Wide and Linear Tuning Range
A new CMOS current controlled ring oscillator is investigated. It is based on a 3 stage ring oscillator. Each stage uses a simple NMOS for switching a current source to charge a capacitor and discharging it thereby generating a ramp output. Its oscillation frequency depends on the current source. This simple circuit can have a wide tuning range but has some non-linearity problem. A modification...
متن کاملA CMOS Ring Oscillator VCO with Quadrature Outputs and High-Tuning Range
This paper presents the design of a new four-stage ring oscillator with quadrature outputs using a 0.13μm CMOS 1P8M technology. The oscillator utilizes feed-forward technique and negative resistance to reduce the delay per stage and provides high frequencies. Employing single PMOS transistor to vary the load impedance allows reaching ultra-wide tuning range. The output frequency ranges from 0.8...
متن کاملDesign of 1V Opamp Using Standard Digital CMOS Technology
This paper addresses the issues involved in designing 1V Op-amp in standard digital CMOS technology. Bulk-driving technique is used to circumvent the metal–oxide semiconductor field-effect transistor turn-on (threshold) voltage requirement. The Op-amp will be designed in a Europractice 0.7μm n-well CMOS process having threshold voltage of 0.76V and –1V for NMOS and PMOS respectively. Simple and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2011
ISSN: 1094-4087
DOI: 10.1364/oe.19.020435