3-D SHAKE TABLE TESTS ON FULL-SCALE 5-STORY STEEL BUILDING WITH OIL DAMPERS
نویسندگان
چکیده
منابع مشابه
Damage Identification Study of a Seven- Story Full-scale Building Slice Tested on the Ucsd-nees Shake Table
A full-scale seven-story reinforced concrete building section was tested on the UCSDNEES shake table during the period October 2005 January 2006. The shake table tests were designed to damage the building progressively through four historical earthquake records. At various levels of damage, ambient vibration tests and low amplitude white noise base excitations with root-mean-square acceleration...
متن کاملDynamic Experiment and Numerical Simulation of a Full Scale Steel Frame with Viscous Dampers
This paper presents a dynamic nonlinear numerical simulation of a 5-story full-scale steel frame structure based on Perform-3D. Flexibility-based fiber element and Maxwell model are adopted for structure member simulation after a post analysis of the shaking table test of a 4-story full-scale steel frame. The author simulates the low cyclic reciprocating load test for the steel members with fib...
متن کاملUncertainty Analysis of System Identification Results Obtained for a Seven Story Building Slice Tested on the UCSD-NEES Shake Table
A full-scale seven-story reinforced concrete building section/slice was tested on the NEES shake table at the University of California San Diego during the period of October 2005 to January 2006. Three output-only system identification methods were used to extract the modal parameters (natural frequencies, damping ratios, and mode shapes) of the test structure at different damage states. In thi...
متن کاملOn the Optimum Placement of Dissipators in a Steel Model Building Subjected to Shaking-Table Tests
The following research presents the numerical and experimental results obtained on a reduced scale steel model of a medium-rise building structure dynamically protected with energy dissipaters. The steel-steel friction dissipates energy as the structure undergoes interstory drifts. A preliminary numerical analysis is performed to determine the best position of the friction dampers in the longit...
متن کاملFull-scale experimental verification of resetable semi-active stiffness dampers
Because of many advantages over other control systems, semi-active control devices have received considerable attention for applications to civil infrastructures. A variety of different semi-active control devices have been studied for applications to buildings and bridges subject to strong winds and earthquakes. Recently, a new semi-active control device, referred to as the resetable semi-acti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2013
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.78.1999