3-D Viscous Flow Analysis of an Axial Flow Pump Impeller
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Air-Water Bubbly Flow in Axial Flow Pump Impeller
In this paper, the lift-law method was applied to design the axial flow pump. Based on Reynolds time-averaged N-S equations and standard k turbulent model, three-dimensional air-water bubbly flow in an axial flow pump impeller was simulated. Under the condition of bubble void fraction of 5%, pressure and void fraction distributions were respectively obtained, movement of bubbles in the impeller...
متن کاملFlow Characteristics Impeller Change of an Axial Turbo Fan
In this paper, three dimensional flow characteristic was presented by a revision of an impeller of an axial turbo fan for improving the airflow rate and the static pressure. TO consider an incompressible steady three-dimensional flow, the RANS equations are used as the governing equations, and the standard k-ε turbulence model is chosen. The pitch angles of 44°, 54°, 59°, and 64° are implemente...
متن کاملShape Optimization of Impeller Blades for a Bidirectional Axial Flow Pump using Polynomial Surrogate Model
This paper describes the shape optimization of impeller blades for a anti-heeling bidirectional axial flow pump used in ships. In general, a bidirectional axial pump has an efficiency much lower than the classical unidirectional pump because of the symmetry of the blade type. In this paper, by focusing on a pump impeller, the shape of blades is redesigned to reach a higher efficiency in a bidir...
متن کاملImpeller Trimming of an Industrial Centrifugal Viscous Oil Pump
Impeller trimming is a proper way to alter the performance of centrifugal pump with a constant speed so as to meet the demand on the specified flow rate and head in pumping systems. The affinity law accounting for the impeller trimming is the key relation to determine the pump performance with a trimmed impeller. There seems no experimental study dealing with such an affinity law for centrifuga...
متن کاملimpeller trimming of an industrial centrifugal viscous oil pump
abstract: impeller trimming is a proper way to alter the performance of centrifugal pump with a constant speed so as to meet the demand on the specified flow rate and head in pumping systems. the affinity law accounting for the impeller trimming is the key relation to determine the pump performance with a trimmed impeller. there seems no experimental study dealing with such an affinity law for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 1997
ISSN: 1023-621X
DOI: 10.1155/s1023621x97000158