3_D surface stereometry of Ag/DLC nanocomposite prepared by RF-PECVD
نویسندگان
چکیده
منابع مشابه
Deposition and characterization of silicon carbon nitride films prepared by RF-PECVD with capacitive coupling
The goals of this work were to synthesize stoichiometric silicon carbon nitride (Si1.5C1.5N4) films using the RF-PECVD method and to characterize the deposited material. Gas mixtures, as opposed to an organic monomer, were chosen for reactants. Gas mixtures allow for varying the concentration of the elements needed for silicon carbon nitride synthesis and thereby optimizing the composition of t...
متن کاملHighly Ordered Amorphous Silicon-Carbon Alloys Obtained by RF PECVD
We have shown that close to stoichiometry RF PECVD amorphous silicon carbon alloys deposited under silane starving plasma conditions exhibit a tendency towards c-SiC chemical order. Motivated by this trend, we further explore the e ect of increasing RF power and H2 dilution of the gaseous mixtures, aiming to obtain the amorphous counterpart of c-SiC by the RF-PECVD technique. Doping experiments...
متن کاملPolymethylmethacrylate/Silver Nanocomposite Prepared by γ-Ray
Polymethylmethacrylate-silver (PMMA/Ag) nanocomposite is synthesized by irradiating the solution of silver ions in methylmethacrylate monomer by γ-ray. In this method, polymerization of the methylmethacrylate monomer and the silver ion reduction occurred simultaneously. Optical properties of the PMMA/Ag solutions are investigated using UV-Vis spectroscopy. The structural characterizations of th...
متن کاملPolyacrylate/silica nanocomposite materials prepared by sol–gel process
Polyacrylate/silica nanocomposite was prepared by sol–gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), c-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanoco...
متن کاملNovel polycarbonate-graphene nanocomposite foams prepared by CO2 dissolution
Polycarbonate foams reinforced with 0,5 wt% of graphene were obtained by firstly melt-mixing the polycarbonate and graphene in an internal mixer, compression-moulding the melt-compounded grinded material and lastly dissolving CO2 inside a high pressure vessel. The CO2 desorption behaviour in the unfilled polycarbonate and nanocomposite was studied in terms of the CO2 saturation concentration an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Results in Physics
سال: 2019
ISSN: 2211-3797
DOI: 10.1016/j.rinp.2019.102731