3D Finite Element Analysis of Lateral Loaded Pile using Beam and Rigid Link
نویسندگان
چکیده
منابع مشابه
Finite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملFinite Element Analysis of the Bumper Beam
The main purpose of bumper is to absorb shock in case of a collision. Several materials have been used to develop these shock-absorbing capabilities, such as steel, aluminium, glass mat thermoplastics and sheet molding compound. The purpose of this project is to design a bumper which is to improve crashworthiness of the bumper beam. Crashworthiness is the ability of the bumper beam to prevent o...
متن کاملA Simple Finite Element Procedure for Free Vibration and Buckling Analysis of Cracked Beam-Like Structures
In this study, a novel and very simple finite element procedure is presented for free vibration and buckling analysis of slim beam-like structures damaged by edge cracks. A cracked region of a beam is modeled using a very short element with reduced second moment of area (I). For computing reduced I in a cracked region, the elementary theory of bending of beams and local flexibility approach are...
متن کاملNovel Axial Flux Brushless Resolver Analysis and Optimization Using 3D Finite Element and d-q Model Method
Resolvers are widely used in electric driven systems especially in high precision servomechanisms. Both encapsulated and pancake resolvers suffer from a major drawback: static eccentricity (SE). This drawback causes a significant increase in resolver output position error (RPE) which could not be corrected electronically. To reduce RPE, this paper proposes a novel structure with axial flux. Pr...
متن کاملasymmetric outer bow length and cervical headgear force system: 3d analysis using finite element method
o bjectives: this study sought to assess distal and lateral forces and moments of asymmetric headgears by variable outer bow lengths. materials and methods : four 3d finite element method (fem) models of a cer- vical headgear attached to the maxillary first molars were designed in solidworks2010 software and transferred to ansys workbench ver. 11 software. modelscontained the first molars, thei...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: LHI Journal of Land, Housing, and Urban Affairs
سال: 2013
ISSN: 2093-8829
DOI: 10.5804/lhij.2013.4.3.271