3D finite element analysis on crack-tip plastic zone
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Crack Welding Process
The numerical simulation of the crack welding process is reported in this paper. The thermo-electro-structural coupled-field finite element analysis is adopted to investigate the welding process of crack surfaces. In the simulation, the pressure-dependent and temperature-dependent electrical contact conditions are considered. From the results, the crack surfaces can melt and weld together under...
متن کاملModal Testing and Finite Element Analysis of Crack Effects on Turbine Blades
The study of vibration response of a turbine blade helps to detect the crack presence in the blade which alters its dynamic characteristics. The change is characterized by changes in the modal parameters associated with natural frequencies. In this paper, study of vibration response is made for turbine blade in the presence of a crack like defect. Turbine blade is initially assumed as a cantile...
متن کاملImproved quarter-point crack tip element
We present a modification to the quarter-point crack tip element and employ this element in two-dimensional boundary integral fracture analysis. The standard singular element is adjusted so that the near-tip crack opening displacement satisfies a known constraint: the coefficient of the term which is linear in the distance to the tip must vanish. Stress intensity factors calculated with the dis...
متن کاملTensile Crack Tip Fields in Elastic-ideally Plastic Crystals
Crack tip stress and deformation fields are analyzed for tensile-loaded ideally plastic crystals. The specific cases of (0 1 O) cracks growing in the [1 0 1] direction, and (1 0 1) cracks in the [0, 1, O] direction, are considered for both fcc and bcc crystals which flow according to the critical resolved shear stress criterion. Stationary and quasistatically growing crack fields are considered...
متن کاملEffect of Inclusions on the Shape and Size of Crack Tip Plastic Zones by Element Free Galerkin Method
Abstract—The present study investigates the effect of inclusions on the shape and size of crack tip plastic zones in engineering materials subjected to static loads by employing the element free Galerkin method (EFGM). The modeling of the discontinuities produced by cracks and inclusions becomes independent of the grid chosen for analysis. The standard displacement approximation is modified by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering, Science and Technology
سال: 2011
ISSN: 2141-2839,2141-2820
DOI: 10.4314/ijest.v2i6.63698