3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling
نویسندگان
چکیده
منابع مشابه
Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling
Fused deposition modeling (FDM) is a three-dimensional (3D) printing technology that is usually performed with polymers that are molten in a printer nozzle and placed line by line on the printing bed or the previous layer, respectively. Nowadays, hybrid materials combining polymers with functional materials are also commercially available. Especially combinations of polymers with metal particle...
متن کاملGraphene-Based Polymer Nanocomposites
Materials science continues to occupy a central place in our lives primarily through the design and creation of new materials, and our quality of life has improved over time thanks to the discovery of new materials. Major milestones in the advancement of our society are intimately associated with materials throughout history: the stone age, bronze age, iron age, steel age (industrial revolution...
متن کاملStraightforward synthesis of conductive graphene/polymer nanocomposites from graphite oxide.
The reduction of graphite oxide (GO) in the presence of reactive poly(methyl methacrylate) (PMMA), under mild biphasic conditions, directly affords graphene grafted with PMMA. The resulting nanocomposite shows excellent electrical conductivities resulting from the optimal dispersion and exfoliation of graphene in the polymer matrix.
متن کامل3D Printing by Fused Deposition Modeling of Capsular Devices for Oral Pulsatile Release Based on Swellable/Erodible Polymers
Swellable/Erodible Polymers A. Melocchi , F. Parietti , F. Casati , A. Maroni , A. Gazzaniga , L. Zema 1 1 Universita Degli Studi di Milano, 2 Massachusetts Institute of Technology Purpose To prepare swellable/erodible capsular devices for oral pulsatile release via 3D printing by Fused Deposition Modeling (FDM), starting from in-house produced filaments based on hydroxypropyl cellulose (HPC), ...
متن کاملFused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications
In this work, the use of fused deposition modeling (FDM) in a (bio)analytical/lab-on-a-chip research laboratory is described. First, the specifications of this 3D printing method that are important for the fabrication of (micro)devices were characterized for a benchtop FDM 3D printer. These include resolution, surface roughness, leakage, transparency, material deformation, and the possibilities...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Materials Today
سال: 2017
ISSN: 2352-9407
DOI: 10.1016/j.apmt.2017.04.003