A 100 W all-fiber linearly-polarized Yb-doped single-mode fiber laser at 1120 nm

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A 100 W all-fiber linearly-polarized Yb-doped single-mode fiber laser at 1120 nm.

A 100 W-class all-fiber linearly-polarized single-mode fiber laser at 1120 nm with an optical efficiency of 50% was demonstrated. The laser consists of a 4.2 m long Yb-doped polarization maintaining fiber with a core diameter of 10 μm and a pair of FBGs written in matched passive fiber. Linearly polarized output with a polarization extinction ratio of 15 dB is achieved by a cavity that selects ...

متن کامل

Efficient linearly polarized ytterbium-doped fiber laser at 1120 nm.

We report a 20 W linearly polarized, spectrally clean Yb-doped fiber laser at 1120 nm with an optical conversion efficiency of 54%. An excellent polarization extinction ratio of more than 23 dB is obtained using fiber Bragg gratings (FBGs) polarization selection technique at all power levels. The results reveal that a Yb-doped fiber laser at 1120 nm could be a promising replacement compared to ...

متن کامل

All-fiber single-mode actively Q-switched laser at 1120 nm.

An all-fiber single-mode actively Q-switched laser at 1120 nm is demonstrated. The laser cavity consists of a 5 m long Yb-doped polarization maintaining gain fiber, an acousto-optical modulator and a pair of FBGs. At a pump power of 2.5 W, a peak power of 0.8 kW is achieved with a pulse duration of 140 ns at a repetition rate of 1 kHz. A slope efficiency of 16.9% with respect to launched pump p...

متن کامل

A linearly-polarized tunable Yb-doped fiber laser using a polarization dependent fiber loop mirror

Article history: Received 29 June 2011 Received in revised form 8 October 2011 Accepted 9 January 2012 Available online 18 January 2012

متن کامل

Yb-Doped Single-Mode Fiber CPA Laser System

High peak power laser systems of up to petawatt [1] are based on chirped pulse amplification (CPA) technique [2]. In the CPA laser system, ultrashort pulses from an oscillator are first stretched below the nonlinear pulse distortion threshold to reduce the peak power and the amplified pulses are recompressed at the output by a compressor. Stable ultrashort pulse oscillator is necessary for CPA ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Optics Express

سال: 2012

ISSN: 1094-4087

DOI: 10.1364/oe.20.028373