A 300 GHz CMOS Transmitter Front-End for Ultrahigh-Speed Wireless Communications

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A 300 GHz CMOS Transmitter Front-End for Ultrahigh-Speed Wireless Communications

This paper presents a 300 GHz transmitter front-end suitable for ultrahigh-speed wireless communications. The transmitter front-end realized in TSMC 40 nm CMOS consists of a common-source (CS) based doubler driven by a two-way D-band power amplifier (PA). Simulation results show that the two-way D-band PA obtains a peak gain of 21.6 dB over a -3 dB bandwidth from 132 GHz to 159 GHz. It exhibits...

متن کامل

Building Blocks for a 24 GHz Phased-Array Front-End in CMOS Technology for Smart Streetlights

According to a recent European Union report, lighting represents a significant share of electricity costs and the goal of reducing lighting power consumption by 20% demands the coupling of light-emitting diode (LED) lights with smart sensors and communication networks. In this context, this paper proposes the integration of these three elements into a smart streetlight, incorporating a 24GHz ph...

متن کامل

A 2.4-GHz 22-Mbps CMOS OOK transmitter for wireless body area network

A 2.4-GHz CMOS on-off keying (OOK) transmitter is developed for applications that require high data rate over 10Mbps in the area of wireless body area network (WBAN) and medical implant communication service (MICS). A novel analog pulse-shaping circuit for reducing power consumption and circuit complexity is employed for the OOK transmitter. Fabricated in 0.13μm CMOS, the transmitter core exclu...

متن کامل

Mixer topology selection for a 1.8 - 2.5 GHz multi-standard front-end in 0.18µm CMOS

In this paper the selection of a mixer topology for a multi-standard, non-concurrent front-end is presented. The front-end is designed for Digital Enhanced Cordless Telephone (DECT) systems and systems for wireless communications, which operate in the 2.4 GHz Industrial Scientific Medical (ISM) band (like Bluetooth or DECT alike systems at 2.4 GHz). Three mixer topologies are presented and eval...

متن کامل

A transformer-loaded receiver front end for 2.4 GHz WLAN in 0.13 m CMOS technology

A 2.4 GHz radio frequency receiver front end with an on-chip transformer compliant with IEEE 802.11b/g standards is presented. Based on zero-IF receiver architecture, the front end comprises a variable gain common-source low noise amplifier with an on-chip transformer as its load and a high linear quadrature folded Gilbert mixer. As the load of the LNA, the on-chip transformer is optimized for ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Electrical and Computer Engineering (IJECE)

سال: 2017

ISSN: 2088-8708,2088-8708

DOI: 10.11591/ijece.v7i4.pp2278-2286