A bimorph microphone using composite piezoelectric polymer.
نویسندگان
چکیده
منابع مشابه
A soft-polymer piezoelectric bimorph cantilever-actuated peristaltic micropump.
A peristaltic micropump was fabricated and characterized. The micropump was fabricated using soft lithography, and actuated using piezoelectric bimorph cantilevers. The micropump channel was formed by bonding two layers of PDMS, mixed at 5:1 and 30:1 ratios. The channel was fabricated in the 5:1 layer using replica molding (REM), where a very simple and inexpensive template was made by straddli...
متن کاملReciprocity failure in piezoelectric polymer composite
Reciprocity principles, which entail equivalent outcome on exchange of cause and effect, are widely used and accepted. We present a piezoelectric composite system designed so that reciprocity does not hold; sensitivity is substantially enhanced. Reciprocity failure is observed in which the piezoelectric direct effect (stress causes polarization) sensitivity dkij is unequal to the converse effec...
متن کاملPiezoelectric Biopolymer–Polymer Composite Films and Microfibers
258 is one where the piezoactivity and mechanical properties can be altered individually so that the mechanical stiffness of the material can be controlled for particular applications or tuned to match that of the surroundings (e.g., air or water) for increased transduction sensitivity. Here, we present a new piezoelectric material based on a helical biopolymer with an inherently large electric...
متن کاملPiezoelectric Bimorph Cantilever for Vibration-Producing-Hydrogen
A device composed of a piezoelectric bimorph cantilever and a water electrolysis device was fabricated to realize piezoelectrochemical hydrogen production. The obvious output of the hydrogen and oxygen through application of a mechanical vibration of ~0.07 N and ~46.2 Hz was observed. This method provides a cost-effective, recyclable, environment-friendly and simple way to directly split water ...
متن کاملA Bimorph Multi-layer Piezoelectric Vibration Energy Harvester
This paper reports a bimorph piezoelectric vibration energy harvester incorporating multiple PZT layers. The advantage of a multi-layer generator is that it produces a higher power than a single-layer generator having the same total thickness. In addition, a lower voltage is required to polarize a multi-layer generator reducing the risk of breakdown during polarization. Moreover, the optimum re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Acoustical Society of Japan (E)
سال: 1983
ISSN: 0388-2861,2185-3509
DOI: 10.1250/ast.4.61