A Chart Method to Determine Necessary Preheat Temperature in Steel Welding.

Proposal for a Modified Fowler-milne Method to Determine the Temperature Profile in Tig Welding at Low Currents

Abstract. It is possible to assess the thermal efficiency of welding shielding gases by means of the arc temperature field analysis. Since this approach opens a remarkable study field to assess different shielding gases, giving support for dealing with advantages and disadvantages of commercial gas mixtures, there is a research line under development, which goal is to find techniques to measure...

Dissimilar Welding of EN 10025 Carbon Steel to AISI 316L Stainless Steel by Friction Stir Welding

In the present Study, a dissimilar joint of carbon steel sheet EN 10025 with 316 L has been welded by FSW and the welding parameters were optimized by RSM software method. For investigation of mechanical properties and microstructural analysis carried out by using optical, scanning electron microscopes with EDS analysis, tensile and hardness test of different area of joints, SZ, TMAZ, HAZ, thei...

Dissimilar Welding of EN 10025 Carbon Steel to AISI 316L Stainless Steel by Friction Stir Welding

In the present Study, a dissimilar joint of carbon steel sheet EN 10025 with 316 L has been welded by FSW and the welding parameters were optimized by RSM software method. For investigation of mechanical properties and microstructural analysis carried out by using optical, scanning electron microscopes with EDS analysis, tensile and hardness test of different area of joints, SZ, TMAZ, HAZ, thei...

Parametric Optimization of TIG Welding on Stainless Steel (202) & Mild Steel by using Taguchi Method

The main objective of industries reveal with manufacturing better quality product at low cost and increase productivity. TIG welding is most vital and common operation use for joining of two similar or dissimilar parts with heating the material or applying the pressure by using the filler material for increasing productivity with less time and cost constrain. The TIG welding parameters are the ...

Analysis of welding in comparable steel grades