A Comprehensive Analysis of AISI 316L Samples Printed via FDM: Structural and Mechanical Characterization
نویسندگان
چکیده
Metal Fused Deposition Modelling is a promising multi-step process able to manufacture metal parts by means of low-cost additive technique. In this study, metal-polymer composite filament characterized homogenous mixture AISI 316L sinterable powders and multi-component polymeric matrix was used fabricate samples FDM printer. A 2 4 full factorial design experiments elaborated define the possible influence relevant printing parameters on dimensional shrinkage, bulk density overall porosity printed samples. addition, mechanical properties were investigated performing tensile tests, compression Charpy impact Rockwell B Vickers hardness tests. An X-ray diffraction analysis conducted assess crystallographic structure
منابع مشابه
Friction-corrosion of AISI 316L/bone cement and AISI 316L/PMMA contacts : ionic strength effect on tribological behaviour
Wear phenomena understanding of implants is a challenge: friction-corrosion of biomaterials, which constitute orthopaedic implants, is a significant issue concerning the aseptic loosening. This work aims at studying AISI 316L/bone cement friction which is a tribological problem related to hip joint cemented prostheses. This study focuses on the ionic strength effect on the tribological behaviou...
متن کاملCorrosion and microstructural analysis data for AISI 316L and AISI 347H stainless steels after exposure to a supercritical water environment.
This article presents corrosion data and microstructural analysis data of austenitic stainless steels AISI 316L and AISI 347H exposed to supercritical water (25 MPa, 550 °C) with 2000 ppb of dissolved oxygen. The corrosion tests lasted a total of 1200 h but were interrupted at 600 h to allow measurements to be made. The microstructural data have been collected in the grain interior and at grain...
متن کاملa phonological contrastive analysis of kurdish and english
deposite the different criticisms on contrastive analysis it has been proved that the results of it(when processed)can be usuful in a tefl environment,specially at the level of phonology.this study is an attempt to compare and contrast the sound systems of kurdish and english for pedagogical aims. the consonants,vowels,stress and intonation of the twolanguages are described by the same model-ta...
15 صفحه اولCorrosion and Hardness Behaviour of AISI 316L SS Implanted with Argon and Oxygen Ions Korózne a pevnostné vlastnosti AISI 316L SS pri implantácii iónmi argónu a kyslíka
Ion implantation creates alterations in surface properties of solids such as corrosion and hardness. The AISI316L stainless steel is being widely used both in artificial knee and hip joints in bio-medical applications. In the present study, the AISI316L SS was implanted with two different ions namely argon and oxygen separately at 100 KeV with a dose of 1x10ions/cm2 at the temperature of 32°C. ...
متن کاملBiomaterial Studies on AISI 316L Stainless Steel after Magnetoelectropolishing
The polarisation characteristics of the electropolishing process in a magnetic field (MEP – magnetoelectropolishing), in comparison with those obtained under standard/conventional process (EP) conditions, have been obtained. The occurrence of an EP plateau has been observed in view of the optimization of MEP process. Up-to-date stainless steel surface studies always indicated some amount of fre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2022
ISSN: ['1662-9809', '1013-9826', '1662-9795']
DOI: https://doi.org/10.4028/p-szzd04