A DC–DC Multiport-Converter-Based Solid-State Transformer Integrating Distributed Generation and Storage

A Solid State Transformer Integrating Distributed Generation and Storage

The development of a Solid State Transformer (SST) that incorporates a DC-DC multiport converter to combine both photovoltaic (PV) power generation and battery energy storage. The DC-DC stage is based on a quad active-bridge (QAB) converter which not merely provides isolation for the load, but also for the PV and storage. The AC-DC stage is implemented with a pulse-width-modulated (PWM) single ...

Photovoltaic Based Dc-Dc Multiport Converter with Distributed Generation

The main objective of the paper is The growing concern for energy saving has increased the usage of LEDbased Street Lights, Electronic Chokes, Compact Fluorescent Lamps, And Inverter-Fed Drives. Hence, the load profile seen by the electrical grid is undergoing a notable change as these devices have to operate from a dc source. Photovoltaic (PV) being a major energy source, the loads can be conn...

Step up dcdc converter pdf

Integrating Solid State Storage in a PCI Express Clustering Interconnect

Executive Summary Direct PCI Express (PCIe) attached flash storage offers unparalleled performance levels and vastly outperforms SAS/SATA-attached flash storage solutions. However, such PCIe attached flash storage cards, in their existing form, are restricted to the confines of the PCIe slots in the host server. This approach can neither support a disaggregated storage (JBOD/RAID-like) mode tha...

Solid-State Bipolar Marx Converter with Output Transformer and Energy Recovery

The purpose of this paper is to present and discuss a general HV topology of the solid-state Marx modulator, for unipolar or bipolar generation connected with a step-up transformer to increase the output voltage applied to a resistive load. Due to the use of an output transformer, discussion about the reset of the transformer is made to guarantee zero average voltage applied to the primary. It ...