A Design Methodology and Analysis for Transformer-Based Class-E Power Amplifier
نویسندگان
چکیده
منابع مشابه
A Class E Power Amplifier with Low Voltage Stress
A new output structure for class E power amplifier (PA) is proposed in this paper. A series LC resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. This resonator causes low impedance at the second harmonic. The output circuit is designed to shape the switch voltage of the class E amplifier and lower the voltage stress of the transistor. T...
متن کاملa class e power amplifier with low voltage stress
a new output structure for class e power amplifier (pa) is proposed in this paper. a series lc resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. this resonator causes low impedance at the second harmonic. the output circuit is designed to shape the switch voltage of the class e amplifier and lower the voltage stress of the transistor. t...
متن کاملDesign of a Class F Power Amplifier
A Class F power amplifier (PA) at 2.5GHz has been designed and fabricated. Test results show 15.7 dB gain with 75.75% power added efficiency (PAE ), at an input level of 25 dBm. The design procedure is presented, with various issues illustrated and addressed. A new method is proposed to obtain the optimum load and source impedances without iterations, which would usually be necessary.
متن کاملAnalysis and design of class E power amplifier considering MOSFET parasitic input and output capacitances
In this study, design theory and analysis for the class E power amplifier (PA), considering the metal oxide semiconductor field effect transistor (MOSFET) parasitic input and output capacitances, are proposed. The input resistance and capacitances cause non-ideal input voltage at gate terminal, which affect the specifications of the class E PA. In the proposed study, non-linear drain-to-source,...
متن کاملA Cmos Low Voltage Class-e Power Amplifier for Umts
In this paper we design a low-voltage class-E power amplifier (PA) in a standard CMOS 0.35μm integrated technology, to be used in a UMTS transceiver having the following specifications: f=1.95 GHz, VDC=1 V, Pout=0.5 W. The designed class-E network accommodates the simultaneous presence of a parasitic ground inductance and losses in the switch and shunt-capacitor. The transistor is dimensioned f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electronics
سال: 2019
ISSN: 2079-9292
DOI: 10.3390/electronics8050494