A design of wet-mateable connector aiming for contactless power transfer and optical communication
نویسندگان
چکیده
Abstract At present, contact watertight connectors are commonly utilized for the connection between underwater electromechanical equipment and seabed observation network. Such conventional inevitably likely to be irreversibly worn when plugging unplugging, besides complicated sealing structures limited service life. This paper designs a Wet-Mateable connector aiming Contactless Power Transfer Optical Communication (PTOC-WMC), which is based on technology of Transmission (CLPT) optical communication. Docking structure sockets plugs designed, facilitating Remotely Operated Vehicle (ROV) operate. A prototype PTOC-WMC was established. The experimental results show that designed can achieve 200W power transmission, with maximum transmission efficiency 94%. communication bandwidth reaches 18MHz. assist rapid safe deployment operation
منابع مشابه
the innovation of a statistical model to estimate dependable rainfall (dr) and develop it for determination and classification of drought and wet years of iran
آب حاصل از بارش منبع تأمین نیازهای بی شمار جانداران به ویژه انسان است و هرگونه کاهش در کم و کیف آن مستقیماً حیات موجودات زنده را تحت تأثیر منفی قرار می دهد. نوسان سال به سال بارش از ویژگی های اساسی و بسیار مهم بارش های سالانه ایران محسوب می شود که آثار زیان بار آن در تمام عرصه های اقتصادی، اجتماعی و حتی سیاسی- امنیتی به نحوی منعکس می شود. چون میزان آب ناشی از بارش یکی از مولفه های اصلی برنامه ...
15 صفحه اولA New System of Contactless Power Transfer with Low Voltage Stress and Parasitic Capacitors Effect
In this paper, a high frequency contactless power transfer (CPT) system is designed with ∅2 inverter drive. This system works in 30MHz frequency and 380W power with low voltage stress and considers the inductive link parasitic capacitor effect. In the design, we formulated the inverter equations first and then suggested another design for the transmitter and the receiver coils as the energy tra...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
Contactless Power Transfer System for Rapid Charger of Electric Vehicle
A contactless power transfer system for charging electric vehicles requires a high efficiency, a large air gap, and a good tolerance to lateral misalignment and needs to be compact and lightweight. A double-sided winding 10 kW transformer based on a 1.5 kW H-shaped core transformer was developed for a rapid charger. Even though the transformer capacity was increased, the dimensions of the 10 kW...
متن کاملDesign of New Contactless Power Supply System
A design method for new contactless power supply systems is proposed. Such systems realize contactless power supply to electrical apparatus, which may keep still or moving relative to the power source. Optimized electric parameters are determined to maximize the power transfer capability. Secondary compensation may be taken to further improve the power transfer characteristics. The applicabilit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP conference series
سال: 2023
ISSN: ['1757-899X', '1757-8981']
DOI: https://doi.org/10.1088/1755-1315/1152/1/012016