A Direct Power Injection Model for Immunity Prediction in Integrated Circuits

Behavioural Model of Integrated Circuits for EMC Prediction

This paper deals with the modeling of integrated circuits for electromagnetic compatibility (EMC) analysis. With reference to complex integrated circuits that usually include huge core logic blocks, analog and mixed signal circuits as well as power sections (smart-power system-on-chip), the paper shows a new behavioral model whose parameters can be derived on the basis of scattering parameters ...

A MEMS Capacitive Microphone Modelling for Integrated Circuits

In this paper, a model for MEMS capacitive microphone is presented for integrated circuits.  The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...

Smart Power Integrated Circuits

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

An Industry-Compliant Immunity Modeling Technique for Integrated Circuits

This paper introduces a new technique for immunity modeling of integrated circuits, compliant with industrial requirements. A specific modeling flow is introduced and validated through measurements performed on several devices.