A dry sterilization process for sterilized products after pressure steam sterilization

A mighty weapon: steam sterilization.

Sterilization by dry heat.

The advantages and disadvantages of three forms of dry heat sterilization are discussed. In addition a fourth method, consisting of heating by infrared rays in vacuo, is described. This method is particularly suitable for instruments used in the operating theatre, since it can replace an autoclave where a supply of steam is not available. Recommended times and temperatures for dry heat steriliz...

Monitoring sterilization of dressings in high-vacuum pressure-steam sterilizers.

Undetected air leaks in a high-vacuum sterilizer can defeat the sterilization process. For this reason the maintenance and supervision of these sterilizers needs expert engineering care. The importance of controlling the high-vacuum sterilization process from the centre of a load rather than the chamber drain is emphasized, and a method of detecting any failure in a high-vacuum process is descr...

Residual formaldehyde after low-temperature steam and formaldehyde sterilization.

The levels of formaldehyde remaining in various articles have been estimated immediately after a low-temperature steam and formaldehyde sterilizing process and after various periods of aeration. These levels have been compared with the levels of ethylene oxide remaining after exposure to an ethylene oxide sterilizing process. In rubber and polythene and a plastic, formaldehyde levels are low an...

Using Superheated Steam in Drying and Sterilization

Botanicals are received in whole, non-sterile form. BI Nutraceuticals sterilizes, mills, and packages the ingredient in sturdy, safe containers before shipping to customers. Photo courtesy of BI Nutraceuticals Using Superheated Steam in Drying and Sterilization It seems counterintuitive to use water vapor in a process to remove water or to heat materials that can be damaged by moisture, but suc...