A fast calculation method of large-cylinder asymmetrical rolling force considering shear effect
نویسندگان
چکیده
منابع مشابه
Application of Modified Slab Method in Asymmetrical Plate Rolling
In this paper, an analytical method based on Modified Slab Method of analysis is presented to study the asymmetrical rolling process due to difference in work rolls radii, rolls speeds and interface frictions. The shear force imposed on material along the contact region is considered to be a function of the frictional factor and the roll gap geometry. Elastic-plastic with linear work hardening ...
متن کاملApplication of Modified Slab Method in Asymmetrical Plate Rolling
In this paper, an analytical method based on Modified Slab Method of analysis is presented to study the asymmetrical rolling process due to difference in work rolls radii, rolls speeds and interface frictions. The shear force imposed on material along the contact region is considered to be a function of the frictional factor and the roll gap geometry. Elastic-plastic with linear work hardening ...
متن کاملCylinder Rolling on Another Rolling Cylinder
This problem was suggested by Bradley Klee. For the related case of one cylinder rolling inside another, see [1]. When one cylinder is directly above the other, we define the line of contact of the lower cylinder, 1, with the horizontal plane to be the z-axis, at x = y = 0. Then, the condition of rolling without slipping for the lower cylinder is that when it has rolled (positive) distance x1, ...
متن کاملA Fast Calculation Method for Analyzing the Effect of Wind Generation on ATC
Wind energy penetration in power system has been increased very fast and large amount of capitals invested for wind farms all around the world. Meanwhile, in power systems with wind turbine generators (WTGs), the value of Available transfer capability (ATC) is influenced by the probabilistic nature of the wind power. The Mont Carlo Simulation (MCS) is the most common method to model the uncerta...
متن کاملThe Effect of Relative Deformation on the Energy-force Parameters in the Asymmetrical Plate Rolling Process
A. Kawałek, Czestochowa University of Technology, Czestochowa, Poland The paper presents the results of asymmetrical plate rolling in the finishing rolling stand of a 3600 mill. The investigation was carried out for S690Ql steel sheets. Tests were conducted for two types of the asymmetric rolling process. In the first case, the asymmetry of the process was introduced by varying the speed of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2019
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814018819522