A heuristic method for detecting and locating faults employing electromagnetic acoustic transducers
نویسندگان
چکیده
منابع مشابه
Locating and Detecting Arrays for Interaction Faults
The identification of interaction faults in component-based systems has focussed on indicating the presence of faults, rather than their location and magnitude. While this is a valuable step in screening a system for interaction faults prior to its release, it provides little information to assist in the correction of such faults. Consequently tests to reveal the location of interaction faults ...
متن کاملDetecting and Locating Faults in Hardware Designs
The state of the art in integrated circuit design is the use of special hardware description languages such as VHDL. Designs are programmed in VHDL and refined up to the point where the physical realization of the new circuit or board can be created automatically. Before that stage is reached, the designs are tested by simulating them and comparing their output to that prescribed by the specifi...
متن کاملElectromagnetic Acoustic Transducers for Robotic Nondestructive Inspection in Harsh Environments
Elevated temperature, gamma radiation, and geometric constraints inside dry storage casks for spent nuclear fuel represent a harsh environment for nondestructive inspection of the cask and require that the inspection be conducted with a robotic system. Electromagnetic acoustic transducers (EMATs) using non-contact ultrasonic transduction based on the Lorentz force to excite/receive ultrasonic w...
متن کاملElectromagnetic Flux Monitoring for Detecting Faults in Electrical Machines
The ability of the electromagnetic flux measured in various locations of a 35-kW cage induction motor to provide useful information about faults was investigated. The usefulness of this monitoring parameter was assessed in comparison with some other electrical parameters used for fault detection, such as stator phase current and circulating currents between the parallel branches of the stator w...
متن کاملA Low Cost Approach for Detecting, Locating, and Avoiding Interconnect Faults in FPGA-Based Reconfigurable Systems
An FPGA-based reconfigurable system may contain boards of FPGAs which are reconfigured for different applications and must work correctly. This paper presents a novel approach for rapidly testing the interconnect in the FPGAs each time the system is reconfigured. A lowcost configuration-dependent test method is used to both detect and locate faults in the interconnect. The “original configurati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Eksploatacja i Niezawodnosc - Maintenance and Reliability
سال: 2017
ISSN: 1507-2711
DOI: 10.17531/ein.2017.4.1