A hybrid RANS model of wing-body junction flow
نویسندگان
چکیده
منابع مشابه
Large-Eddy Simulation of a Wing–Body Junction Flow
Large-eddy simulations of awing-body junction flow experimentally studied are presented.Wall junction flows are common in engineering applications, but the flow physics at the corners of the junction is not well understood. Moreover, in these types of flows, the performance of the subgrid-scale models frequently used for large-eddy simulations is not well characterized. To address these issues,...
متن کاملFlow Simulation of N3–X Hybrid Wing-Body Configuration
System studies show that a N3–X hybrid wing-body aircraft with a turboelectric distributed propulsion system using a mail-slot inlet/nozzle nacelle can meet the environmental and performance goals for N+3 generation transports (three generations beyond the current air transport technology level) set by NASA’s Subsonic Fixed Wing Project. In this study, a Navier-Stokes flow simulation of N3–X on...
متن کامل2.5. Measurements in a Two-Dimensional Boundary Layer and a Wing-Body Junction Flow
2.4. Pressure Transducer The Endevco model 8507-C2 pressure transducer (figure 10) was used for the present measurements. It is a high sensitivity piezoresistive, circular-deflection-type, pressure transducer that has a nominally flat frequency response from 0-70 kHz with a rated sensitivity of 130 mV/psi and a full scale output of 300 mV. The transducer contains an active four-arm strain gage ...
متن کاملHybrid RANS/LES computation of plane impinging jet flow
Flow characteristics are presented of simulation results of plane impinging jets at high nozzle-plate distances, with two k-ω based hybrid RANS/LES (Reynolds Averaged Navier–Stokes/Large–Eddy Simulation) models and a k-ω RANS model. The first hybrid RANS/LES model is obtained by substitution of the turbulent length scale by the local grid size in the destruction term of the turbulent kinetic en...
متن کاملRANS-based Aerodynamic Shape Optimization of a Blended-Wing-Body Aircraft
A series of RANS-based aerodynamic shape optimization for an 800-passenger blended-wing-body aircraft is performed. A gradient-based optimization algorithm and a parallel structured multiblock RANS solver with Spalart–Allmaras turbulence model are used. The derivatives are computed using a discrete adjoint method considering both frozen-turbulence and full-turbulence assumptions. A total of 274...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: European Journal of Mechanics - B/Fluids
سال: 2020
ISSN: 0997-7546
DOI: 10.1016/j.euromechflu.2019.09.014