A hygrothermal dynamic zone model for building energy simulation
نویسندگان
چکیده
منابع مشابه
An improved explicit scheme for whole-building hygrothermal simulation
Although implicit methods require extra calculation, they have been largely used for obtaining numerical approximations of time-dependent differential conservation equations in the building science domain, thanks to their stability conditions that enable the use of larger time steps. Nevertheless, they require important sub-iterations when dealing with highly nonlinear problems such as the comb...
متن کاملEnergy Simulation and Management of the Main Building Component Materials Using Comparative Analysis in a Mild Climate Zone
The objective of this study is to evaluate the energy efficiency of residential buildings by using natural energy and optimizing the choice of materials for heat and cold saving with the Ecotect simulation software. According to analysis and simulation was found that the optimum material of main building components in a mild climate zone of Rasht city is the Brick Conc block Plaster for wall wi...
متن کاملA Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...
متن کاملSoftware Components for Dynamic Building Simulation
This paper describes a standard of software components for building energy and control systems modeling. This technology is well positioned to overcome the limits of existing tools and to allow better collaboration between various engineering domains coexisting in building field. A standard named ICAr is proposed in addition to the Modelica approach to ensure models interoperability. So, the st...
متن کاملA Hygrothermal Building Model Based on the Object-oriented Modeling Language Modelica
A new hygrothermal building model is being developed within the research project GENSIM by the Fraunhofer institutes FIRST and IBP. The model implementation takes place by using the objectoriented modeling language Modelica. As a starting point for the development of the new building model, the researchers used the physical models of the simulation tools WUFI (hygrothermal wall simulation) and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy and Buildings
سال: 2016
ISSN: 0378-7788
DOI: 10.1016/j.enbuild.2016.10.002