A K-Band High Power and High Isolation Stacked-FET Single Pole Double Throw MMIC Switch Using Resonating Capacitor
نویسندگان
چکیده
منابع مشابه
High Isolation Single-Pole Four-Throw RF MEMS Switch Based on Series-Shunt Configuration
This paper presents a novel design of single-pole four-throw (SP4T) RF-MEMS switch employing both capacitive and ohmic switches. It is designed on high-resistivity silicon substrate and has a compact area of 1.06 mm(2). The series or ohmic switches have been designed to provide low insertion loss with good ohmic contact. The pull-in voltage for ohmic switches is calculated to be 7.19 V. Shunt o...
متن کاملSingle-pole-four-throw switch using high-aspect-ratio lateral switches
Introduction: Multi-throw switches are widely used in microwave circuits for switch matrices and true-time-delay phase shifting applications. Traditionally, the multi-throw switch uses GaAs MESFETs and pin diodes to perform its switching function. It exhibits good performances at low frequencies, but deteriorates in the high frequency range beyond 1 GHz [1]. On the other hand, the monolithic mi...
متن کاملDesign of X Band High Power Amplifier MMIC Based on AlGaN/GaN HEMT
In this paper, we have presented an X band high power amplifier based on MMIC (Monolithic Microwave Integrated Circuit) technology for satellite remote sensing systems. We have used GaN HEMT process with 500 nm gate length technology with VD= 40 V and VG= -2 V in class E structure. The proposed two-stage power amplifier provides 25 dB power gain with maximum output power of 49.3 dBm at 10 GHz. ...
متن کاملHigh Efficiency Class-F MMIC Power Amplifiers at Ku-Band
Two high efficiency Ku-band pHEMT power amplifier MMICs are presented in this paper. A single stage, high efficiency amplifier provides a peak power added efficiency of 57.6% with 10.5 dB associated gain and 26.5 dBm output power into a 50Ω load at 14 GHz. Additionally, a dual stage, high gain amplifier provides a peak power added efficiency of 50.4% with 19.7 dB associated gain and 27.5 dBm ou...
متن کاملCITY UNIVERSITY OF HONG KONG 香港城市大學 Study on Innovative Integrated Power Amplifier/Low Noise Amplifier/Switch for Wireless Application
The front-end transmit/receive switch circuit is one of the essential elements in modern wireless handsets. The main function of the transmit/receive switch is switch the antenna either to the transmitter or the receiver. It must have high isolation in order to avoid the RF-power of the transmitter (PA) turning on the receiver (LNA), resulting in high loss or in the worst case damage. Low inser...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Microwave and Wireless Components Letters
سال: 2016
ISSN: 1531-1309,1558-1764
DOI: 10.1109/lmwc.2016.2597235