A Measuring Method of Thermal Diffusivity by Continuous Heating
نویسندگان
چکیده
منابع مشابه
Measuring the thermal diffusivity in a student laboratory
The paper describes a method for measuring the thermal diffusivity of materials having a high thermal conductivity. The apparatus is rather simple and low-cost, being therefore suitable in a laboratory for undergraduate students of engineering schools, where several set-ups are often required. A recurrence numerical approach solves the thermal field in the specimen, which is depending on the th...
متن کاملsolution of security constrained unit commitment problem by a new multi-objective optimization method
چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولQuantitative Thermal Diffusivity Imaging of Disbonds in Thermal Protective Coatings Using Inductive Heating D
Problems of adherence of thermal protective coatings to aerospace structures have become important with their use on vehicles such as the space shuttle and for jet engine turbine blades. In these structures a dielectric coating which acts as a thermal barrier. is bonded to a conductive substrate. Failure of these coatings to adhere to the substrate can result in catastrophic failure of the vehi...
متن کاملMeasuring Thermal Conductivity by Ångstrom’s Method
In this experiment, κ, the thermal conductivity of a rod of brass, was measured by periodically heating one end of the rod. Turning the heater attached to the rod on and off with a 10 mHz square wave signal, waves of heat were sent along the length of the rod, measured by two thermistors a distance ∆x apart. Taking these temperatures as a function of time, a Fourier transform was applied to a 1...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1971
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.37.1195