A New Bending Force Formula for the V-Die Bending Process

Statistical Analysis of the V-tool Bending Process Parameters in the Bending of Hc260y Steel

J. Cumin, I. Samardžić, L. Maglić. Mechanical Engineering Faculty, J.J. Strossmayer University of Osijek, Slavonski brod, Croatia. This paper presents statistical analysis of the parameters in the V-tool bending process of the HC260Y steel. Assessment of the mathematical model and analysis of variance (ANOVA) were performed within the design of experiments. The hydraulic testing machine Amsler ...

effect of mandrel, its clearance and pressure die on tube bending process via rotary draw bending method

one of the most prominent industries is bending, while using rotary draw bending method is known to be the most conventional approach for thin wall tube bending. pressure die is one effective tool which boosts the tube during the process and eventually improves the bending quality. other effective parameters are mandrel and the amount of clearance between tube and mandrel. in the present study,...

A process model for air bending

A so called 'three-section' model for air bending is presented. It is assumed that a state of plane strain exists and that Bernoulli's law is valid. The material behaviour is described with Swift's equation, and the change of Young's modulus under deformation is addressed. As compared with other models, the model described in the paper is capable of generating information such as required punch...

Applied on the Rotary Draw Bending Process

FtsZ Constriction Force - Curved Protofilaments Bending Membranes.

FtsZ assembles in vitro into protofilaments (pfs) that are one subunit thick and ~50 subunits long. In vivo these pfs assemble further into the Z ring, which, along with accessory division proteins, constricts to divide the cell. We have reconstituted Z rings in liposomes in vitro, using pure FtsZ that was modified with a membrane targeting sequence to directly bind the membrane. This FtsZ-mts ...