A new hybrid electrochemical-mechanical process (PEMEC) for polishing complex and rough parts
نویسندگان
چکیده
A new polishing process for metallic parts has been developed by simultaneously coupling drag finishing and electrochemical polishing. This hybrid process, called PEMEC, enables an improvement in the surface roughness within some minutes, at same time, preserves shape of edges. is based on a synergistic effect between abrasive chemical mechanisms. It confirmed its suitability to be applied complex rough surfaces produced additive manufacturing SLM parts.
منابع مشابه
A Contact-Mechanics-Based Model for General Rough Pads in Chemical Mechanical Polishing Processes
In this paper, a general rough-pad model is proposed for the chemical mechanical polishing CMP process. The proposed rough-pad model has several advantages over existing models. First, general height distribution functions and autocorrelation functions are used to describe the pad surface, which are easier to obtain than pad asperity height and curvature distributions in existing models. Second...
متن کاملDevice independent process control of dielectric chemical mechanical polishing
The use of the chemical-mechanical polishing (CMP) process in the semiconductor industry is growing rapidly, and it is a critical step in the manufacturing of integrated circuits. The CMP process is complicated by many factors, and controlling all of these factors in a single controller has been unrealistic. One of the most significant factors complicating control is the dependency of the polis...
متن کاملAdvanced Process Control in Dielectric Chemical Mechanical Polishing (cmp)
The decrease in device dimensions is placing extremely tight constraints on many aspects of the CMP process. We outline four key areas that will provide significant steps toward attaining this level of control. In particular, we discuss the need for improved in-line surface topography metrology, and show that that high resolution profilometry appears to meet this need. We demonstrate the need f...
متن کاملThe Mechanical Polishing Process Based on Pin-on-disk Experiments
In many works on the material removal in the Chemical Mechanical Process (CMP), the effects of several process parameters have been addressed. However, a thorough understanding of the mechanisms of material removal and a model to correlate the process parameters to material removal rate (MRR) are still lacking. This appendix develops such models for polishing based on the results from the pin-o...
متن کاملA Mechanical Model for Erosion in Copper Chemical-mechanical Polishing
The Chemical-mechanical polishing (CMP) process is now widely employed in the ultra-large-scale integrated semiconductor fabrication. Due to the continuous decrease in the sub-micron feature size, characterization of erosion has become an important issue in Cu CMP. In this paper, the erosion in Cu CMP is considered at two levels: wafer and die levels. Erosion models are developed based on the m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CIRP Annals
سال: 2022
ISSN: ['1660-2773', '0007-8506', '1726-0604']
DOI: https://doi.org/10.1016/j.cirp.2022.03.011