A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites
نویسندگان
چکیده
منابع مشابه
Casting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملQuasicrystal-reinforced Mg alloys
The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg-Zn-Y and Mg-Zn-Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α-Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/m...
متن کاملQuasicrystal-reinforced Mg alloys
The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg–Zn–Y and Mg–Zn–Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α-Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/m...
متن کاملProduction of titanium matrix composites reinforced with SiC particles
Vienna University of Technology, Institute of Materials Science and Technology, Karlsplatz 13/308, 1040 Vienna, Austria b The Slovak Academy of Sciences, Institute of Materials and Machine Mechanics, Račianska 75, 83102 Bratislava, Slovak Republic Branch Lab Dresden of the Fraunhofer Institute for Manufacturing and Advanced Materials, Winterbergstrabe 28, 01277 Dresden, Germany Austrian Researc...
متن کاملCompoforging of Al-Si Metal Matrix Composites Reinforced with -SiC: An Alternative Technique
This paper reports the -SiC particles surface modification by copper Electroless Plating (EP), as well as a morphological characterization of Al-Si reinforced composite obtained with such modified particles and consolidated by compoforging. The -SiC particles were obtained by thermal degradation of organic waste. The compoforging technique is a hybrid between the compocasting process and semi-s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part B: Engineering
سال: 2016
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2016.02.019