A New Testing Method to Evaluate a Weld Cracking Susceptibility for Stainless Steel Sheets

a new approach to credibility premium for zero-inflated poisson models for panel data

هدف اصلی از این تحقیق به دست آوردن و مقایسه حق بیمه باورمندی در مدل های شمارشی گزارش نشده برای داده های طولی می باشد. در این تحقیق حق بیمه های پبش گویی بر اساس توابع ضرر مربع خطا و نمایی محاسبه شده و با هم مقایسه می شود. تمایل به گرفتن پاداش و جایزه یکی از دلایل مهم برای گزارش ندادن تصادفات می باشد و افراد برای استفاده از تخفیف اغلب از گزارش تصادفات با هزینه پائین خودداری می کنند، در این تحقیق ...

Stainless steel weld metal designed to mitigate residual stresses

There have been considerable efforts to create welding consumables which on solid state phase transformation partly compensate for the stresses which develop when a constrained weld cools to ambient temperatures. All of these efforts have focused on structural steels which are ferritic. In the present work, alloy design methods have been used to create a stainless steel welding consumable which...

Slow Strain Rate Testing to Evaluate the Susceptibility of Welded Low Alloy Steel to Environmentally Assisted Cracking

Libya is an important oil country particularly to European countries. The combustion products of fossil fuels are causing great damage through pollution, acid rains and the greenhouse effect. Hydrogen can be stored in three different ways, as a gas, as liquid, as a material and metal hydrides. Low alloy steels have been widely used in different scale welded structures. The mechanical properties...

Crystallography of Widmanstätten austenite in duplex stainless steel weld metal

Two kinds of austenite grow from d-ferrite during the cooling of the duplex stainless steel weld deposits studied here, Widmanstätten plates and allotriomorphs which precipitate at d–d grain boundaries. It is found using microtexture measurements that the preferred crystallographic orientation of the Widmanstätten austenite can be estimated using established theory if it is assumed that there i...

Effect of grain size on solidification cracking susceptibility of type 347 stainless steel during laser welding