A Non-Destructive Imaging Method Based on Integral Signals of Ultrasonic Pulse
نویسندگان
چکیده
منابع مشابه
Phased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملPulse Compression Ultrasonic Non Destructive Evaluation of Thick Polymer Samples
The use of ultrasonic signals at sub-MHz frequencies for Non Destructive Evaluation of thick polymer samples is described. It will be shown that the combination of low-frequency coded signals such as chirps, together with appropriate signal processing methods such as pulse compression, can provide a powerful tool for ultrasonic NDE. To achieve this goal, it is essential that the measurement sys...
متن کاملComparison between Ultrasonic and Pulse - Radar Non - Destructive Testing Systems
-This paper describes comparison between our developed two Non-Destructive Testing (NDT) system with ultrasonic method and pulse-radar method. These systems could provide information of embedded objects in concrete structure. First, we introduce these NDT systems. The raw output images of these methods keep us from understanding them. To overcome this problem, we apply fuzzy logic into them. Ne...
متن کاملMeasurement and Modelling of the Rubber Resilience based on Ultrasonic Non-destructive Testing in Tires
In tire industry, it is very crucial to evaluate physical and mechanical properties of the rubber which is used for production of the tire, to ensure the quality of the final product. Resilience is an important property of a rubber, which cannot be evaluated through direct measurement in production cycle in this industry. Therefore, non-destructive ultrasonic testing, which has been used in man...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Review of Computer Engineering Studies
سال: 2021
ISSN: 2369-0755,2369-0763
DOI: 10.18280/rces.080102