A Novel Approach to Transverse Flux Machine Construction
نویسندگان
چکیده
The article presents a concept for new design of the well-known Transverse Flux Machine (TFM) made with use flat core used in classical electrical machines. proposed was first analytically verified and subsequently using finite element method, which fully corroborated results. simulations show that set three single-phase TFM machines slotted rotor yokes generates torque over times greater than an induction motor twice as large Fractional Slot Concentrated Winding—Permanent Magnet Synchronous Machines (FSCW-PMSM). performed comparative calculations confirmed generated by operating on principles similar to can generate much those currently common use.
منابع مشابه
A Novel Transverse Flux Generator in Direct-Driven Wind Turbines
The higher specific torque and power density of a transverse flux permanent magnet (TFPM) machine in comparison to a conventional machine makes it a promising direct-driven wind turbine generator. The new topology presented in this paper is believed to have a better utilization of the available in the nacelle space. This would favor a reduced inactive weight of the generator and thus remove one...
متن کاملLinear Transverse Flux Reluctance Machine with Permanent Magnets
A new structure of linear transverse flux machine (TFM) is presented in this paper. It is in fact a variable reluctance linear machine having permanent magnets on the mover. Its structure and its working principle will be discussed. After a preliminary design of the motor a 3D FEM analysis was carried out before optimizing the designed linear motor. The flux densities in the machine and the sta...
متن کاملDynamic Characteristics for E-shaped Core Transverse Flux Machine
This paper presents the dynamic characteristics of the transverse flux linear motor (TFLM) with permanent magnet (PM) excitation, which has E-shaped core. Because of the inherent feature of TFLM with PM excitation that the flux flow path is threedimension, the solid type stators and mover cores are used. In case of adoption of solid type stators and mover cores, as the motor speed is increased,...
متن کاملA Novel Integrated Approach to Project-level Automated Machine Control/guidance Systems in Construction Projects
The current research aims to further investigate the application of Automated Machine Control/Guidance (AMC/G) in construction projects and proposes an integrated approach for: (1) Improving the administrative infrastructure required for the optimal application of AMC/G; and (2) Orchestrating the machine-level AMC/G technologies into a coherent project-level system committed to the coordination...
متن کاملModeling and Static Analysis of Primary Consequent-Pole Tubular Transverse-Flux Flux-Reversal Linear Machine
A novel primary consequent-pole tubular transverse-flux flux-reversal linear machine (TTFFRLM) is proposed in this paper. The permanent magnets (PMs) of the machine are located on the inner surface of the short teeth of the primary iron cores for reducing the amount of PM in long stroke drive systems, and the primary is easily manufactured. The structure and principle of this machine are analyz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2021
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en14227690