A novel capacitance sensor for fireside corrosion measurement
نویسندگان
چکیده
منابع مشابه
Capacitance Position Sensor for LISA Noise Measurement
This paper discusses two techniques investigated for use in a capacitance-based position sensor for the Eöt-Wash LISA noise measurement. The advantages and disadvantages of both techniques are reviewed and some elementary mathematical analysis is presented. A prototype implementation based on the more successful of the two techniques has been constructed.
متن کاملDevelopment of Fireside Corrosion Models for Advanced Combustion Systems
A comprehensive fireside corrosion project was undertaken to better understand the corrosion mechanisms operating on the lower furnace walls and superheaters in modern coal-fired utility boilers. Eight U.S. coals commonly burned in boilers have been selected to represent a wide range of coal chemistry. These coals will be burned in a pilot-scale combustion facility to closely simulate the actua...
متن کاملFireside Corrosion of Alloys for Combustion Power Plants
A program on fireside corrosion is being conducted at Argonne National Laboratory to evaluate the performance of several structural alloys in the presence of mixtures of synthetic coal ash, alkali sulfates, and alkali chlorides. Candidate alloys are also exposed in a small-scale coal-fired combustor at the National Energy Technology Laboratory in Pittsburgh. Experiments in the present program, ...
متن کاملModeling of capacitance and sensitivity of a MEMS pressure sensor
In this paper modeling of capacitance and sensitivity for MEMS capacitive pressure sensor is presented. In capacitive sensor the sensitivity is proportional to deflection and capacitance changes versus pressure. Therefore first the diaphragm displacement, capacitance and sensitivity of sensor with square diaphragm have been modeled and then simulated using finite element method (FEM). It can b...
متن کاملLab-scale Study on Fireside Superheaters Corrosion in Mswi Plants
Combustion of the municipal waste generates highly corrosive gases (HCl, SO2, NaCl, KCl and heavy metals chlorides) and ashes containing alkaline chlorides and sulphates. Currently, corrosion phenomena are particularly observed on superheater’s tubes. Corrosion rates depend mainly on installation design, operating conditions i.e. gas and steam temperature and velocity of the flue gas containing...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Review of Scientific Instruments
سال: 2009
ISSN: 0034-6748,1089-7623
DOI: 10.1063/1.3262500