A Novel Continuous Extrusion Process to Fabricate Wedge-Shaped Light Guide Plates
نویسندگان
چکیده
منابع مشابه
Using UV roll-to-plate imprint lithography to fabricate light guide plates with microdot patterns
Conventional methods used to fabricate the light guide plates (LGPs), such as injection molding and hot embossing, are difficult and unsuitable. In this study, the authors propose a new manufacturing process for the roll-to-plate UV imprint lithography (RPIL) technique that fabricates LGPs with dot patterns. A flexible and transparent sheet mold with microstructures required by the RPIL machine...
متن کاملSimulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die
The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...
متن کاملAn Accurate Upper Bound Solution for Plane Strain Extrusion through a Wedge-Shaped Die
An upper bound method for the process of plane strain extrusion through a wedge-shaped die is derived. A technique for constructing a kinematically admissible velocity field satisfying the exact asymptotic singular behavior of real velocity fields in the vicinity of maximum friction surfaces (the friction stress at sliding is equal to the shear yield stress on such surfaces) is described. Two s...
متن کاملStructural and acoustical wave interaction at a wedge-shaped junction of fluid-loaded plates
Two semi-infinite elastic plates are joined along a line forming a wedge structure with unilateral fluid loading in the outer sector of the two plates. The structure is modeled using thin plate theory, allowing freely propagating flexural and longitudinal waves. The junction is mechanically connected with an applied force and moment acting there to simulate a possible internal connection. The g...
متن کاملGelcasting as a Novel Processing Route to Fabricate Partially Stabilized Zirconia Ceramic Bodies
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Polymer Science
سال: 2013
ISSN: 1687-9422,1687-9430
DOI: 10.1155/2013/610132