A novel process of ozone catalytic oxidation for low concentration formaldehyde removal
نویسندگان
چکیده
منابع مشابه
Formaldehyde degradation by catalytic oxidation.
Formaldehyde used for the disinfection of a laminar-flow biological safety cabinet was oxidatively degraded by using a catalyst. This technique reduced the formaldehyde concentration in the cabinet from about 5,000 to about 45 mg/m3 in 8 h. This technique should prove useful in other applications.
متن کاملDegradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron
The purpose of the current study is to evaluate formaldehyde degradation ratio with various methods in a batch reactor. In this work, the ozonation, sonolysis (ultrasonic), and ozone sonolysis, sono catalytic ozonation (SCO), and nano zero-valent iron catalyst processes were investigated for removal of formaldehyde. In addition, the influence of important factors such as pH (5–9), ultrasonic po...
متن کاملUV/ H2O2 Advanced Oxidation Process for Simultaneous Removal of NO and SO2: A Review
This study presents a review on advanced oxidation processes (AOP) for simultaneous removal of NO and SO2. AOP is based on using a strong oxidant such as ozone and H2O2 which is able to generate highly reactive intermediates. The pollutant will be oxidized and removed by these intermediates. In recent years, AOP has been considered as an effective and attractive technology in the field of flue ...
متن کاملSingle Step and Non-Catalytic Process for Formaldehyde Production from Methane using Microchannel Reactor: Theoretical Analysis
Conventionally, methane is reformed into syngas, and subsequently converted into C1-oxygenates (methanol and formaldehyde). A novel option is the catalyst-free single-step conversion of methane to C1-oxygenates. This study presents a comprehensive model of methane partial oxidation to formaldehyde as an intermediate chemical species in methane oxidation process using microreactor. The dependenc...
متن کاملCatalytic ozone oxidation of benzene at low temperature over MnOx/Al-SBA-16 catalyst
The low-temperature catalytic ozone oxidation of benzene was investigated. In this study, Al-SBA-16 (Si/Al = 20) that has a three-dimensional cubic Im3m structure and a high specific surface area was used for catalytic ozone oxidation for the first time. Two different Mn precursors, i.e., Mn acetate and Mn nitrate, were used to synthesize Mn-impregnated Al-SBA-16 catalysts. The characteristics ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Catalysis
سال: 2017
ISSN: 1872-2067
DOI: 10.1016/s1872-2067(17)62890-0