A novel reverse flow reactor coupling endothermic and exothermic reactions
نویسندگان
چکیده
منابع مشابه
Integrated design and control of plantwide systems coupling exothermic and endothermic reactions
The problem of integrated design and control of plantwide systems coupling endothermic and exothermic reactions is addressed. Processes simultaneously carrying on the endothermic first-order reaction A→R+Q and the exothermic second-order reaction B+Q→P are considered. As the physical properties of the species involved vary, possible flowsheets are identified and feasible control strategies are ...
متن کاملEndothermic freezing on heating and exothermic melting on cooling.
Generally, a liquid freezes exothermally on cooling and a crystal melts endothermally on heating. Here we report an opposite occurrence--a liquid's endothermic freezing on heating and the resulting crystal's exothermic melting on cooling at ambient pressures. C(p) decreases on freezing and increases on melting, and the equilibrium temperature meets the thermodynamic requirement. Melting on cool...
متن کاملDesign and Control of Gas-Phase Reactor/Recycle Processes with Reversible Exothermic Reactions
A gas-phase reactor with reversible exothermic reactions is the classical example of the many tradeoffs between operating costs and capital costs. Because per-pass conversion is limited by chemical equilibrium, recycle is almost always needed, and this gas recycle is expensive because of the high capital cost and high energy cost of gas compression. At low temperatures, conversion is limited by...
متن کاملShear-Induced Exothermic Chemical Reactions
The structure of controlled high-strain-rate shear bands generated in Ti-Si reactive powders has been investigated by means of the radd symmetric collapse of a thick-walled cylinder. Shear localization developed at global strains of 0.2-0.4 and a strain rate of lo4 s-I. Within the shear bands, local shear strains were up to 100 9d local shear strain rates were lo7 s-'. Chemical reactions were i...
متن کاملAir Purification in a Reverse-Flow Reactor: Model Simulations
The behavior of a reverse-flow reactor was studied for the purification of polluted air by catalytic combustion. A heterogeneous one-dimensional model was extended with a heat balance for the reactor wall. An overall heat transport term is included to account for the small heat losses in radial direction. The calculations are compared to experimental data without using fit parameters. The agree...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Science
سال: 2002
ISSN: 0009-2509
DOI: 10.1016/s0009-2509(01)00423-7