A Perturbation Method for the 3D Finite Element Modeling of Electrostatically Driven MEMS
نویسندگان
چکیده
منابع مشابه
A methodology for fast finite element modeling of electrostatically actuated MEMS
In this paper, a methodology is proposed for expediting the coupled electro-mechanical finite element modeling of electrostatically actuated MEMS. The proposed methodology eliminates the need for repeated finite element meshing and subsequent electrostatic modeling of the device during mechanical deformation. We achieve this by using an approximation of the charge density on the movable electro...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
A Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملfixed versus removable appliance for palatal expansion; a 3d analysis using the finite element method.
several appliances have been used for palatal expansion for treatment of posterior cross bite. the purpose of this study was to evaluate the stress induced in the apical and crestal alveolar bone and the pattern of tooth displacement following expansion via removable expansion plates or fixed-banded palatal expander using the finite element method (fem) analysis.two 3d fem models were designed ...
متن کاملFinite-element modeling of the transient response of MEMS sensors
The finite-element method of analysis is unrestricted by size considerations and is well suited for the study of very small structures such as MEMS devices embedded in structures. This paper presents the numerical approach and results for a silicon-based micro-flow sensor for pulsed-flow sensing. The new approach presented here is the treatment of transient problems. A finite-element formulatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2008
ISSN: 1424-8220
DOI: 10.3390/s8020994