A PFC Rectifier Based EV Charger for Harmonic Reduction
نویسندگان
چکیده
منابع مشابه
Total Harmonic Distortion Analysis of Front End Current for Diode Rectifier with Sepic Pfc
Front end current distortion of rectifier converter leads to low power factor, high THD, distribution system losses, neutral harmonic currents, over rated power equipments in a power system. In addition, the presence of harmonics in line currents may lead current distortion, create additional heating and over voltage problem, loading and losses in the utility distribution systems. The aim of th...
متن کاملHarmonic Reduction Technique Using Flying Capacitor Based Z Source Inverter for a DVR
The Dynamic Voltage Restorer (DVR) is a commercially available, popular device to eliminate voltage sags and swells in the distribution lines. Its basic function is to inject the voltage difference (difference between the pre-sag and sag voltage) to the power line and maintains the pre-sag voltage condition in the load side. The efficiency of the DVR depends on the performance of the efficiency...
متن کاملHarmonic Reduction in a Single-switch Three-phase Boost Rectifier with Harmonic-injected Pwm
HARMONIC REDUCTION IN A SINGLE-SWITCH THREE-PHASE BOOST RECTIFIER WITH HARMONIC-INJECTED PWM by Qihong Huang Fred C. Lee, Chairman Electrical Engineering
متن کاملTHD Reduction of Distribution System Based on ASRFC and HVC Method for SVC under EV Charger Condition for Power Factor Improvement
Abstract: Electric vehicles (EVs) have been gaining popularity in recent years due to growing concerns about fuel depletion and increasing petrol prices. Random uncoordinated charging of multiple EVs at residential distribution feeders with moderate penetration levels is expected in the near future. This paper describes a high performance voltage controller for the EVs charging system, and prop...
متن کاملInductor Design Method of DCM Interleaved PFC Circuit for 6.6-kW On-board Charger
Because the on-board charger (OBC) is installed in electric vehicles (EVs), high power density is regarded as a key technology. Among components of the OBC, inductors occupy more than 30% of the total volume. Thus, it is important to reduce the volume and the weight of inductors while maintaining thermal stability. Discontinuous conduction mode (DCM) can satisfy these requirements; however, onl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2019
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2019.08.214