A Programmable Reference-Voltage Source
نویسندگان
چکیده
منابع مشابه
A programmable CMOS bandgap voltage reference circuit using current conveyor
This paper presents a new structure of a bandgap circuit which can be programmed to get any desired output voltage. Unlike conventional bandgap circuits, the proposed bandgap circuit uses MOS transistors operating in subthreshold region instead of bipolar transistors to generate PTAT and IPTAT currents. Use of the current conveyor makes the circuit capable of being operated at lower supply volt...
متن کاملVery low-noise, high-accuracy programmable voltage reference
We have designed and tested a very low-noise, highaccuracy programmable voltage reference that is intended as an alternative to batteries for the realization of automated low-frequency noise measurement systems. The output voltage, which can be set via a built-in RS232 interface, ranges from 0 to 5 V with a resolution and long-term stability of 250 V. The power spectral density of the output vo...
متن کاملA Temperature Compensation Voltage Controlled Oscillator Using a Complementary to Absolute Temperature Voltage Reference
This paper presents a temperature compensation voltage controlled oscillator (VCO) based on Cross-Coupled pair and Colpitts structures which is suitable for military fields. Also, two inductors have been used for increasing the negative conductance. By using this method, start-up condition has been improved. Two varactors and a simple capacitor bank are applied for covering a wide tunning range...
متن کاملUWB Mixer improvement with Regulated Voltage Source
This paper presents a design of an UWB downconversion integrated CMOS resistive ring mixer with Linear Voltage Regulator (LVR), to supply required biasing voltages for the mixer section. The designed mixer circuit has been optimized for using in heart rate extraction system with microwave Doppler radar at 2.4GHz frequency. This mixer needs 2 DC bias voltages equal to 0.5 and 1 volts for its bes...
متن کاملREFERENCE VOLTAGE DRIVER FOR LOW-VOLTAGE CMOS A m CONVERTERS
A circuit for generating reference voltages for an A D converter is presented. The circuit consisting of a bandgap reference and a driver circuit is capable of operating on sub 1-volt supply voltages. The circuit is designed using a standard 0.5 p m CMOS technology. Simulations show maximum 0.24% variation in the generated reference voltage over a temperature range from -20 "C to I00"C and a su...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Active and Passive Electronic Components
سال: 1998
ISSN: 0882-7516,1563-5031
DOI: 10.1155/1998/57176