A QUAD CMOS GATES CHECKING METHOD
نویسندگان
چکیده
منابع مشابه
A modeling technique for CMOS gates
In this paper, a modeling technique for CMOS gates, based on the reduction of each gate to an equivalent inverter, is presented. The proposed method can be incorporated in existing timing simulators in order to improve their accuracy. The conducting and parasitic behavior of parallel and serially connected transistors is accurately analyzed and an equivalent transistor is extracted for each cas...
متن کاملA Test Environment for Validation of Subthreshold and Leakage Current Estimation Method in CMOS Logic Gates
Several analytical methods for estimating the subthreshold and gate oxide leakage currents in CMOS circuits have been presented in the literature. However, such currents are strongly dependent on the fabrication process targeted, and the methods present different prediction data accuracy according to the profile of logic gates, in terms of transistor arrangements, stacked devices, and gate sizi...
متن کاملCharge-based Current Model for Cmos Gates
It can be shown that g 2 w of eqn. 13 has the same form as gI(J) of eqn. 4, i.e. the Helms equation, with certain manipulations. Compared with the Iannone and Darcie and the Helms formulas, our formula has some extra terms involving fl and E. Usually, spontaneous effects can be ignored, but we retain the terms related to f i in case its effect becomes important. When the number of subcarriers i...
متن کاملPower Consumption Analysis in CMOS Static Gates
This paper addresses power consumption in CMOS logic gates through an study considering the design and technology points-of-view. Through SPICE simulations, the relationship between charge/discharge and short-circuit components of dynamic power consumption are investigated both considering different logic gates and its evolution through technology scaling. Experimental results show that dynamic...
متن کاملDesign of Near-Threshold CMOS Logic Gates
Numerous efforts have made to balance the tradeoff between power consumption, area and speed of a design. While studying the design at the two extreme ends of the design spectrum, namely the ultra-low power with acceptable performance at one end and high performance with power within limit at the other has not made. One solution to achieve the ultra-low power consumption is to operate the desig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Computing
سال: 2019
ISSN: 2312-5381,1727-6209
DOI: 10.47839/ijc.18.3.1518