A QUANTIFICATION METHOD OF CRACKS ON REINFORCED CONCRETE SHEAR WALLS
نویسندگان
چکیده
منابع مشابه
A Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls
Architectural limitations in many situations make it necessary for the RC shear walls to be extended in plan in different directions at a single location that makes them a 3D configuration. Analysis of such walls is very challenging. In this research about 450 cases of 3D shear walls are considered with different shapes and heights. L, T and H-shape walls are studied. They are nonlinearly analy...
متن کاملinvestigation on diagonal reinforced concrete shear walls behavior under cyclic lateral load using finite element method
buildings with wall or frame-wall systems are more effective against earthquake forces and sustain less damage than buildings which their lateral resistance is solely depends on frames. four reinforced concrete (rc) structural wall specimens were subjected to cyclic loading using finite elements method with abaqus software in order to study influence of diagonal web reinforcement. the research ...
متن کاملShear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading
Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...
متن کاملA Blind Prediction Test of Nonlinear Analysis Procedures for Reinforced Concrete Shear Walls
A full scale slice of a 7 story reinforced concrete building was tested on the shake table at the UCSD Engelkirk Structural Research Centre in 2006. As part of the research project, a blind prediction contest was sponsored to assess the capability of currently available analysis procedures to predict the seismic response of cantilever reinforced concrete shear wall structures. This paper descri...
متن کاملprediction method of drying shrinkage crack in reinforced concrete walls
because thin plate reinforced concrete members such as walls and slabs are greatly influenced by the drying shrinkage, cracks can occur in these members due to the restraint of the volume change caused by drying shrinkage. therefore, the control of cracking due to drying shrinkage is very important in building construction that the thin plate members are frequently used. however, few researches...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2021
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.86.598