A robust 43-GHz VCO in CMOS for OC-768 SONET applications
نویسندگان
چکیده
منابع مشابه
Ultra-Wideband, Low-Power, Inductorless, 3.1-4.8 GHz, CMOS VCO
A low-power, inductorless, UWB CMOS voltage controlled oscillator is designed in 0.18 μm CMOS technology targeting to a UWBFM transmitter application. The VCO is a Double-Cross-Coupled Multivibrator and generates output frequencies ranging from 1.55 GHz to 2.4 GHz. A low-power frequency doubler based on a Gilbert cell, which operates in weak inversion, doubles the VCO tuning range from 3.1 GHz ...
متن کاملA Low-Power 0.13pm CMOS OC-48 SONET and XAUI Compliant SERDES
The design of a continuous rate octal 1.0 to 3.2 Gb/s serializer/deserializer circuit that meets SONET and XAUI requirements is presented. The performance of the SERDES surpasses stringent OC-48 jitter generation and tolerance specifications. This is achieved with the use of a master-slave PLL tuning scheme and meticulous attention to layout and isolation techniques. Implemented in a 0 . 1 3 p ...
متن کاملMultiplexor and Clock Multiplier for OC-768 Fiber Communications
. Abstract We have developed a Clock Multiplying Unit and 4 to 1 Multiplexor (CMUIMUX 4:l) that operates up to 47Gb/s. The on board VCO is LC tuned and the output clock jitter is Lpspp. The eye diagram of the output is 400mV swing with rise and fall times of less than 9ps. This integrated circuit was processed in a 120GHz BICMOS 0.25um process. Power dissipation is only 1W for a chip area of Zm...
متن کاملQ-band VCO for 77-GHz in
This paper includes Q-band VCO power injection-locked buffer for 77-GHz FM in 0.13-μm CMOS process. The center frequen VCO is 34.75-GHz with 1.6% tuning range. T noise performance shows -102.43 dBc/Hz frequency. The measured maximum single ou dBm and the ideal differential output power is dBm, owing to the injection-locked buffer w capability. The fabricated chip size is 0.51 × 0.1 consumption ...
متن کاملA 5 GHz LC-VCO with Active Common Mode Feedback Circuit in Sub-micrometer CMOS Technology
A 1.2V 5GHz low-cost voltage-controlled oscillator (VCO) with active common mode feedback has been implemented in a CMOS/RF 90nm technology for a robust I/Q generation using a frequency divider-by-2 (DIV2). As the input common mode of the DIV2 affects critically its performance, a calibration method to correct the output common mode of the VCO has been proposed and validated through post-layout...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Journal of Solid-State Circuits
سال: 2004
ISSN: 0018-9200
DOI: 10.1109/jssc.2004.829970