A SALINE DROP REGULATOR.
نویسندگان
چکیده
منابع مشابه
A Low-Voltage, Low Quiescent Current, Low Drop-Out Regulator
The demand for low-voltage, low drop-out (LDO) regulators is increasing because of the growing demand for portable electronics, i.e., cellular phones, pagers, laptops, etc. LDO’s are used coherently with dc-dc converters as well as standalone parts. In power supply systems, they are typically cascaded onto switching regulators to suppress noise and provide a low noise output. The need for low v...
متن کاملA Cmos Capacitor-less Low Drop-out Voltage Regulator
A 3-5V 50mA CMOS low Drop-out (LDO) linear regulator with a single compensation capacitor of 1pF is presented. The circuit realization is well-studied and developed with respect to the loop-gain response, the transient response, the output noise, the output accuracy, as well as the standby power consumption. The proposed LDO regulator is implemented in the AMI 0.6um CMOS process, the active lay...
متن کاملHigh PSRR Low Drop-out Voltage Regulator (LDO)
In order to solve the stability problems and increase the PSRR performance of the Low Drop-out Voltage (LDO) a novel technique is presented. The main purpose of this work was to obtain a high PSRR, high power efficiency with a low load current. To achieve this, several techniques such as Nested Miller Compensation (NMC), Pole-Zero Tracking Frequency Compensation (PZTFC) and Single Miller Compen...
متن کاملDYNAMIC SIMULATION OF A HIGH PRESSURE REGULATOR
In this paper, the dynamic simulation for a high pressure regulator is performed to obtain the regulator behavior. To analyze the regulator performance, the equation of motion for inner parts, the continuity equation for diverse chambers and the equation for mass flow rate were derived. Because of nonlinearity and coupling, these equations are solved using numerical methods and the results are ...
متن کاملA 1.21V, 100mA, 0.1µF-10µF output capacitor low drop-out voltage regulator for SoC applications
A 1.21V output, 100mA, 0.1μF-10μF output capacitor, ESR-independent, low voltage, low drop-out voltage regulator for portable power applications is designed and fabricated in a 0.5μm CMOS process with an area of 0.22 mm. The use of a wide-range output capacitor LDO enables reduced target system PCB size and Bill of Materials (BOM). A 0.05%/V line regulation, 0.001%/mA load regulation with 220mV...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Lancet
سال: 1911
ISSN: 0140-6736
DOI: 10.1016/s0140-6736(01)54243-9