A SEISMIC RETROFIT BY STEEL PLATE WALL
نویسندگان
چکیده
منابع مشابه
Seismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملSeismic Retrofit of Bridge Steel Truss Pier Anchorage Connections
In assessments of the seismic adequacy of existing steel bridges, the steel-to-concrete anchorage connections typically found at the base of steel truss piers can be potentially vulnerable, having little to no ductility and inadequate strength to resist seismic demands. Many other non-ductile failure locations may also exist along the seismic load path. Failure would result in unacceptable perf...
متن کاملCorner Crack Effect on the Seismic Behavior of Steel Plate Shear Wall System
Although, experimental studies have reported fracture at the corner of Steel Plate Shear Walls (SPSW), no study has been performed to investigate the crack effect, yet. Therefore, in this paper, the effect of crack at the corner of SPSWs on the seismic behavior of the system was investigated. Two probable cracks, that have been studies at the corner of SPSWs utilizing extended Finite Element me...
متن کاملSeismic Retrofit of a Historical Building in Tehran University Museum Using FRP Technology and Steel Jacketing
In this paper evaluation of seismic capacity of a historical building is carried out. It had been used as a national library about 40 years ago. Also, before that, it had been constructed as a part of a Royal complex. This building has been constructed by traditional methods using bricks and mortars. The ceilings system of the structure consists of jack arches. Also, the roof of the building ha...
متن کاملSeismic Retrofit of Bridge Steel Truss Piers Using a Controlled Rocking Approach
This paper investigates a seismic retrofit technique that allows bridge steel truss piers to uplift and rock on their foundation. Displacement-based passive energy dissipation devices buckling-restrained braces, or BRBs are implemented at the uplifting location to control the rocking response while providing additional energy dissipation. The hysteretic behavior of the controlled rocking system...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIJ Journal of Technology and Design
سال: 2011
ISSN: 1881-8188,1341-9463
DOI: 10.3130/aijt.17.825