A Self-Flushing Method with Spark-Erosion Machining
نویسندگان
چکیده
منابع مشابه
A self-flushing method with spark-erosion machining
• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...
متن کاملMathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis (RESEARCH NOTE)
Electrical discharge machining has the capability of machining complicated shapes in electrically conductive materials independent of hardness of the work materials. This present article details the development of multiple regression models for envisaging the material removal rate and roughness of machined surface in electrical discharge machining of Hastelloy C276. The experimental runs are de...
متن کاملSpark erosion as a metal-resin bonding system.
PURPOSE Resin to metal bond strength of two commercial and one experimental metal-resin bonding system for crown and bridge veneer composites was evaluated. MATERIALS AND METHODS All specimens were prepared and tested according to ISO 10477 Amendment 1. A high precious alloy (HPA), a Co/Cr-alloy (Co/Cr) and pure titanium (Ti) were wet-ground to a final surface finish of 800 grit and air-dried...
متن کاملElectrode Erosion in a High Energy Spark Gap*
The erosion rates for hemispherical electrodes, 2.5 em in diameter, made of graphite, copper-graphite, brass, two types of copper-tungsten, and three types of stainless steel have been examined in a spark gap filled with air or nitrogen at one atmosphere. The electrodes were subjected to 50,000 unipolar pulses (25 )ls, 4-25 kA, 5-30 kV, 0.1-0.6 Coul/shot) at repetition rates ranging from 0.5 to...
متن کاملSpark erosion: a high production rate method for producing Bi(0.5)Sb(1.5)Te3 nanoparticles with enhanced thermoelectric performance.
We report a new 'spark erosion' technique for producing high-quality thermoelectric nanoparticles at a remarkably high rate and with enhanced thermoelectric properties. The technique was utilized to synthesize p-type Bi(0.5)Sb(1.5)Te(3) nanoparticles with a production rate as high as 135 g h(-1), using a relatively small laboratory apparatus and low energy consumption. The compacted nanocompos...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CIRP Annals
سال: 1983
ISSN: 0007-8506
DOI: 10.1016/s0007-8506(07)63372-1