A Simple Method for Charpy Impact Test at Liquid Helium Temperature

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Local Approach of the Charpy Test at Low Temperature

Charpy V-notch impact testing is widely used in the toughness assessment of large forged components, e.g. the pressure vessel for pressurised water reactors m). At low temperature, A508 C1.3 nuclear pressure vessel steel fails by cleavage fracture. The results reported here are part of both an experimental program and numerical investigations which aim at the establishment of a non-empirical re...

متن کامل

MgB2 HEB Mixers at Operation Temperatures above Liquid Helium Temperature

In this paper we discuss results of MgB2 thin films deposition for the hot-electron bolometer (HEB) application. For this purpose a custom made hybrid physical-chemical vapour deposition (HPCVD) system was built. For films thicknesses d in the 15-45nm range the critical temperatures were from 34K to 40K. For bridges as narrow as 500nm the critical current density was >107A/cm2 indicating a high...

متن کامل

Impact Toughness Modification of NIST Low-Energy Charpy Verification Specimens for Testing at Room Temperature

The possibility for the National Institute for Standards and Technology (NIST) to certify Charpy reference specimens for testing at room temperature (21 °C ± 1 °C) instead of −40 °C was investigated in a previous study, in which a slightly increased likelihood of specimen jamming was observed at the low-energy level (13 J to 20 J). Moreover, there is a concern that the higher impact toughness o...

متن کامل

Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy

In this paper, we investigate variation of the wavelength, intensity and polarization of the self-assembled InAs/GaAs quantum dots emission by microphotoluminescence spectroscopy at the liquid helium temperature. The microcavity wafer sample is grown by molecular beam epitaxy (MBE) and chemically etched into the micropillar structure (with elliptical cross section - long and short axis 2µm×1.5µ...

متن کامل

Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy

In this paper, we investigate variation of the wavelength, intensity and polarization of the self-assembled InAs/GaAs quantum dots emission by microphotoluminescence spectroscopy at the liquid helium temperature. The microcavity wafer sample is grown by molecular beam epitaxy (MBE) and chemically etched into the micropillar structure (with elliptical cross section - long and short axis 2µm×1.5µ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Tetsu-to-Hagane

سال: 1983

ISSN: 0021-1575,1883-2954

DOI: 10.2355/tetsutohagane1955.69.6_641