A simplified method for prediction of embankment settlement in clays

simplified method for settlement prediction of single pile and pile group using a hyperbolic model

a simplified approach for nonlinear analysis of the load-displacement response of a single pile and a pile group is presented using the load-transfer approach. a hyperbolic model is used to capture the relationship between unit skin friction and pile-soil relative displacement developed at the pile-soil interface and the load-displacement relationship developed at the pile end. as to the nonlin...

settlement analysis of embankment with finite element method

it is correct control and monitoring of modern embankment dams that are very vital in the geotechniqual constructions. the improvement of methods of stability control, using the effective stress and the measurement of ganglionic water pressure in embankment dams cause more the safety for this kind of dams. nowedays there is such an idea that in stead of using of being safety factor against coas...

A Simplified Perturbation Model for Prediction of Mean Ionic Activity Coefficient in Aqueous Electrolyte Solution

prediction of ignition delay period in d.i diesel engines

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...